Gasbarre Thermal Processing Systems recently completed the installation of a Continuous Vacuum Furnace (model CVPQ) with 5 BAR pressure quench capabilities. The 5 zone furnace is rated to 2400F. The independent load and quench modules allow the heat module to hold temperature and vacuum creating an extremely pure environment. Workloads are indexed through the furnace as quickly as every 6 minutes. As only the workload is cooled (not the heat chamber), it makes for a very efficient system. A pair of internal vacuum/pressure doors that seal against corresponding internal machined flanges means that no complex clamping mechanisms are required. Quick transference from the heat module to the cool module and fast quench capabilities (up to 5 BAR) make this an ideal furnace to sinter-harden SS parts.
With products that range from batch furnaces to continuous belt furnaces, pusher furnaces, vacuum furnaces, humpback furnaces, and much more,Gasbarre can solve any application challenge with the expertise and passion needed to drive your success. Gasbarre Thermal Processing Systems specializes in the design and manufacture of custom-engineered nitriding furnaces specific to the thermal processing industry.
For more information on how Gasbarre Thermal Processing System scan manufacture custom-engineered heat treating equipment solutions for your specific thermal heating requirements, contact Matt Marzullo at (401) 467-5200 or via email at [email protected]. You can also visit our website at www.gasbarre.comand find us on LinkedIn (Gasbarre Products Inc.), Twitter (@gasproinc), and Facebook (Gasbarre Products Inc.).